Guide 02
12/12 light schedule: how to flip and keep nights dark
For photoperiod plants, the dark period is what starts flower. This guide covers when and how to flip to 12 hours on and 12 off, how to keep that night actually dark, and why you should not stretch the day again after the flip. Horticulture for adults growing where it is legal — not medical advice.
Educational horticulture for adults growing where it is legal. Product categories are named only; there are no shop or affiliate links yet.
The dark period is the switch
Photoperiod cannabis plants use night length, not a date on the calendar, to decide when to flower. Indoors, growers usually trigger that change by setting the lights to twelve hours on and twelve hours off, and by keeping that off period truly dark. The plant is reading the night. If light reaches it during those twelve hours, the signal is muddled: flowering can stall, stretch oddly, or throw mixed growth.
This guide is about that flip, the timer, and the leaks that undo it. It is not a buying guide for a particular lamp, and it does not apply in the same way to autoflowers, which bloom on their own timetable. For those plants, see autoflower bloom, without 12/12. For the weeks that follow a successful flip, start with the week-by-week flowering guide.
When to flip
Flip when the plant has the height, frame and root system you want to take into flower, and when you still have room for stretch. Many plants add a large share of their final height in the first two or three weeks after the change. A plant that already fills the tent at the end of vegetative growth may end up in the lamps.
There is no horticultural need to fade the schedule down an hour at a time. A clean change from a long-day schedule (often eighteen hours on) to 12/12 on a chosen day is the usual method. Pick a clock time you can live with — many people set the dark period to start in the evening so they can work in the space with the lights on — and then leave that clock alone.
If several plants share a room, they share a night. You cannot run 12/12 and a long-day schedule in the same light-tight space without one of them seeing the wrong night.
How to set a schedule that actually holds
Use a timer you trust, plug the lamp into the timer (not the other way around), and test it through a full day before it matters. A cheap timer that slips, a smart plug that loses Wi‑Fi, or a power cut at the wrong moment can turn a twelve-hour night into a short one. If the power in your space is unreliable, a simple mechanical timer, or a timer with a battery backup, is less drama than an app.
Write down the on and off times. When something looks wrong two weeks later — new leafy growth in the tops, a plant that will not settle into flower — the first question is whether the night is still twelve hours and still dark, not whether you need a new nutrient.
Keep the on and off times consistent. Shifting the whole schedule by several hours in one day is another kind of interruption. If you must move the clock, do it in small steps over several days.
What “uninterrupted darkness” actually means
The tent or room should be dark enough that, after your eyes adjust, you do not see a glow on the leaves. Common leaks are easy to miss in the daytime: a zip that does not close fully, a cable hole without a cover, a hallway light under a door, a charger LED, a dehumidifier display, a fish-eye window in a tent roof, even a bright status light on the lamp itself.
A practical check: at the start of the dark period, turn off the room lights, zip the space, and wait a minute. Look for edges, corners and entry points. Cover or move anything that glows. If you need to enter at night, use a very dim green or red torch briefly rather than flipping the main lights — and do not make a habit of it. Every visit is a compromise; the aim is to keep those compromises rare and short.
If you grow in a cupboard or a spare room rather than a tent, the same rule holds. Street light through a curtain is still light. A light-proof tent or a well-sealed room exists for this reason; see tents and support.
Light intensity during the twelve hours on
The dark period starts flower. The twelve hours of light still have to grow it. The tops want enough intensity to fill out, without sitting so close that they bleach, canoe or dry out. There is no single hanging height that fits every fixture. Use the maker’s starting distance, then watch the plants: pale, crispy or clawed tops, or a bleach patch on the highest flowers, are a sign to raise the lamp or turn it down. A hand held at canopy height for a few seconds is a rough heat check, not a substitute for looking at the plant over a couple of days.
A meter that reads light at the canopy is useful if you have one, and is listed under meters, but you do not need one to run a clean 12/12. Even coverage matters as much as a peak number: a bright hotspot and dark corners make uneven ripening later.
Do not try to “make up” for a weak fixture by leaving it on longer than twelve hours once you have flipped. Extra hours of light shorten the night and can push a photoperiod plant back toward vegetative growth. If the lamp is underpowered, the honest options are a stronger fixture, fewer plants, or a longer wait — not a thirteen-hour day.
Common questions
Do autoflowers need 12/12?
No. Autoflowers begin flowering on their own timetable, whatever the day length (within reason). Many growers keep them on a long-day schedule all the way through so the plants receive more hours of light. A flip to 12/12 is not required and often means less light in total. See the autoflower bloom guide.
What if I had a light leak or a timer failure?
One short incident is not usually the end of a grow. Fix the leak or the timer, return to a clean 12/12, and watch for a few days. What you do not want is a leak that repeats every night. If you then see odd leafy growth in the tops, or late banana-like growth, treat it as stress and keep the nights dark; the late-flower problems guide covers what that can look like.
Can I run 11/13 or 13/11 instead?
Twelve and twelve is the standard indoor method because it is simple and it works for a wide range of photoperiod plants. Some growers experiment with slightly longer nights. The important part is a stable, dark night that the plant can count on, not a clever number. If you change the split, change it once, write it down, and keep it consistent.
Gear this guide points to
Named as categories only. Links will be added if an affiliate or retail programme is chosen, and will be labelled.
- Lights and timers — a fixture you can dim or raise, and a timer that does not drift
- Tents and support — a light-proof enclosure and covered cable ports
- Meters — optional light meter; a simple torch for night checks
What to read next
The day you change the clock is a separate decision; see when to flip to 12/12. Once the schedule is stable, use the week-by-week flowering guide as a map, and flowering nutrients for the feed shift. Licensed operators sourcing lighting or climate kit can use For business.